No building is required and it's only a couple minutes from box to flight after you hang your gear the first time (30 min.)
All that's needed is to band on your receiver, speed control and 2-3 oz battery pack.

The GWS IPS DX-"A" (5.86:1 ratio) motor drive with 9x7 SF prop can be used and just plugs on the motor mount. Currently however, since inexpensive post mount style outrunner brushless motors are available, the older brushed motors aren't being recommended or supported any more.
(yes they work, are cheap, but just wear out too fast...) Brushless motors and systems are now available in our store (link below)   (NOTE: see the Owners Hanger page for brushless motor mounting and other mods)   Also included is a spare parts bag with some clear ripstop fabric repair tape, and extra hardware.  (So not to have to raise prices, the printed owners manual and box label shown is no longer included with the plane.)   Download the newest owners manual in color PDF format here:
OWNERS MANUAL
(Right click and choose save-as file if you don't have the browser plug-in)

---

WHAT YOU GET

The red model is shown assembled (bottom view) with the yellow one fully disassembled. HOW IT COMES:
Ribs and high torque servos are pre-installed with the servos tested and control linkage adjusted.
Box size is 24 x 4 x 4 inches with room left over to store your motor & prop.
NOTE: the trim material shown is now supplied as a separate option (peel & stick) so you can make any trim design you want.
Instructions to apply it can be found on the Owners Hanger page.
Suspension Rods for brushless motor use are now included at no extra charge!

---

ONLY $159.00 USD Shipping is via USPS Priority Mail for 2-3 days delivery within the US fully insured.
  Choose from the following main wing colors.  They are currently:
RED, ORANGE, YELLOW, Fluorescent Yellow, Fluorescent Orange, Also available in WHITE
(note monitors vary in how they portray colors - FL colors are day-glow in appearance)

Each plane is individually hand made to the highest standards. We usually ship within a couple days plus add about 3 days for shipping in the US.
Allow about a week if overseas plus customs.  

Go direct to STORE

   Proudly designed and hand constructed in the USA    Please email us if you have any questions.   Note: We answer ALL email as soon as possible so if you don't hear back from us quickly be sure your program isn't filtering out replies and keep trying as email isn't always 100% reliable. Also use a specific subject title so we'll spot it.

---

RC  HOME	CARBON FALCON	CARBON KESTREL	CARBON TRAVELER CONVERTIBLE	CARBON PRIME
JOYRIDER	CONTACTS	=JSF=	WALLY WING	POLLY PUSHER

Copyright © 2001 - 2009 Ace Sim RC - Medford Oregon USA